Magnetic pins
For the Millano Group chocolate factory we designed and produced personalised pins with a strong magnetic clasp.
The pins showed the company logo, faithfully reproducing even the smallest detail.
From design to finished product
The technical drawing of the pin – front, profile with the magnet, and back – alongside the finished product.
Technical details
The pin is 25 mm in diameter, and the 17.5 mm magnet covers almost the whole of its underside. The magnetic clasp holds the pin through the fabric without leaving a hole. The flat surface of the pin is branded with high-quality UV print.
- Personalised pins with the Millano Group logo
- Strong magnetic clasp
- Pin dimensions
- 25 × 25 × 3 mm
- Clasp type
- Magnet
- Magnet diameter
- 17.5 mm
A personalised company pin – how did we do it?
- Challenge
A personalised pin with a chocolate factory’s logo
The Millano Group logo includes not only lettering but also a thin arc, the word “GROUP” and a drawing of a cocoa bean with fine details. Each of these elements had to stay legible and visually attractive on a personalised pin 25 mm in diameter.
The second challenge was the attachment. The pin was to be worn on workwear and company clothing, so a classic pin-back clasp wasn’t the best solution. A clasp that wouldn’t damage clothes was needed.
- Solution
A 3D pin with a raised logo and a magnetic attachment
We made the whole logo on the pin as raised UV print built up in several layers. As a result, the lettering, the arc and the cocoa bean stayed legible despite the product’s small size.
Instead of a pin-back, we used a strong 17.5 mm magnet set into the back of the pin. This attachment lets the company gadget be worn without piercing the fabric.
- Result
A personalised pin for company clothing
The finished pin with the Millano Group logo could be attached to any item of clothing without damaging the fabric. This made the personalised company gadget more comfortable in everyday use.
The Millano Group logo stayed recognisable even on a surface 25 mm in diameter – both the lettering and the full cocoa bean graphic remained visually attractive.
The pin on clothing
More case studies
Does your logo have lots of detail? We can turn it into a pin.
We’ll choose the production technology and attachment so the symbol keeps its character at a small size too.